How deep does a .30-06 penetrate Dyneema UHMWPE?

At the muzzle, a representative .30-06 load penetrates approximately 20 mm (0.8 inches) into dyneema uhmwpe.

What is the impact energy of a .30-06?

This .30-06 load carries about 3756 joules (2770 ft-lb) at the muzzle.

BALLISTICENGINE

Will a .30-06 Penetrate Dyneema UHMWPE?

Yes — defeats a 6 mm dyneema uhmwpe barrier

Penetration depth

20 mm (0.8″)

Impact velocity

880 m/s (2887 fps)

Muzzle energy

3756 J (2770 ft-lb)

Bullet behaviour

Intact

Fired at the muzzle, a representative .30-06 load (9.7 g, FMJ, 880 m/s) reaches roughly 20 mm (0.8 inches) into dyneema uhmwpe. That is enough to defeat a typical barrier of this material — treat anything behind it as exposed.

About Dyneema UHMWPE

UHMWPE armor (~6 mm), a modern lightweight ballistic laminate.

.30-06 against other materials

Material	Depth (mm)	Depth (in)
Red Brick	247 mm	9.7″
Concrete	215 mm	8.5″
Tempered Glass	37 mm	1.5″
Steel A36	18 mm	0.7″
Steel AR500	9 mm	0.4″

Run your own numbers in the calculator →

.30-06 vs Red Brick .30-06 vs Concrete .30-06 vs Tempered Glass .30-06 vs Steel A36 .30-06 vs Steel AR500 .30-06 vs Aluminum 6061 .30-06 vs Pine Wood .30-06 vs Oak Wood 9mm Luger vs Dyneema UHMWPE .45 ACP vs Dyneema UHMWPE .40 S&W vs Dyneema UHMWPE .380 ACP vs Dyneema UHMWPE .357 Magnum vs Dyneema UHMWPE .44 Magnum vs Dyneema UHMWPE 10mm Auto vs Dyneema UHMWPE .22 LR vs Dyneema UHMWPE

Will a .30-06 Penetrate Dyneema UHMWPE?

About Dyneema UHMWPE

.30-06 against other materials

Related