Will a .40 S&W Penetrate Dyneema UHMWPE?

No — stops inside dyneema uhmwpe (reaches 2 mm of a 6 mm barrier)
Penetration depth
2 mm (0.1″)
Impact velocity
300 m/s (984 fps)
Muzzle energy
527 J (388 ft-lb)
Bullet behaviour
Intact

Fired at the muzzle, a representative .40 S&W load (11.7 g, FMJ, 300 m/s) reaches roughly 2 mm (0.1 inches) into dyneema uhmwpe. It loses its energy before defeating a typical barrier of this material.

About Dyneema UHMWPE

UHMWPE armor (~6 mm), a modern lightweight ballistic laminate.

.40 S&W against other materials

MaterialDepth (mm)Depth (in)
Red Brick59 mm2.3″
Concrete31 mm1.2″
Tempered Glass13 mm0.5″
Steel A361 mm0.0″
Steel AR5001 mm0.0″
Run your own numbers in the calculator →

Related