Will a 6.5 Creedmoor Penetrate Dyneema UHMWPE?

Yes — defeats a 6 mm dyneema uhmwpe barrier
Penetration depth
20 mm (0.8″)
Impact velocity
800 m/s (2625 fps)
Muzzle energy
2912 J (2148 ft-lb)
Bullet behaviour
Intact

Fired at the muzzle, a representative 6.5 Creedmoor load (9.1 g, BTHP, 800 m/s) reaches roughly 20 mm (0.8 inches) into dyneema uhmwpe. That is enough to defeat a typical barrier of this material — treat anything behind it as exposed.

About Dyneema UHMWPE

UHMWPE armor (~6 mm), a modern lightweight ballistic laminate.

6.5 Creedmoor against other materials

MaterialDepth (mm)Depth (in)
Red Brick313 mm12.3″
Concrete249 mm9.8″
Tempered Glass41 mm1.6″
Steel A3620 mm0.8″
Steel AR5008 mm0.3″
Run your own numbers in the calculator →

Related

6.5 Creedmoor vs Red Brick6.5 Creedmoor vs Concrete6.5 Creedmoor vs Tempered Glass6.5 Creedmoor vs Steel A366.5 Creedmoor vs Steel AR5006.5 Creedmoor vs Aluminum 60616.5 Creedmoor vs Pine Wood6.5 Creedmoor vs Oak Wood9mm Luger vs Dyneema UHMWPE.45 ACP vs Dyneema UHMWPE.40 S&W vs Dyneema UHMWPE.380 ACP vs Dyneema UHMWPE.357 Magnum vs Dyneema UHMWPE.44 Magnum vs Dyneema UHMWPE10mm Auto vs Dyneema UHMWPE.22 LR vs Dyneema UHMWPE