Holdover Chart — 9×19mm, 7 to 50 m
A silhouette reference card with the hold marked at five pistol distances off a 25 m zero. Reduced to fit A4 — a reference card, not a scaled target.
How to use it
- Print at 100% and keep it in the range bag.
- Distances are measured off a 25 m zero with the named load.
- Hold high by the figure given: at 50 m that is 30 mm above the point you want to hit.
- Re-check against your own gun — barrel length moves muzzle velocity, and velocity moves everything else.
Ballistic data on this sheet
| Distance | Drop (mm) | MOA | Velocity (m/s) | Time of flight |
|---|---|---|---|---|
| 7 m | -13 | 6.3 | 352 | 0.02 s |
| 10 m | -9 | 3.0 | 350 | 0.03 s |
| 15 m | -4 | 0.9 | 345 | 0.04 s |
| 25 m | 0 | 0.0 | 336 | 0.07 s |
| 50 m | -30 | 2.0 | 318 | 0.15 s |
Computed by the BallisticEngine G1 point-mass model at 15 °C, sea level, 1013 hPa, no wind. Negative drop means the bullet lands below the point of aim. A different bullet weight or barrel length moves every number in this table — run your own load.
Other targets
- Zeroing Target — 9×19mm @ 25 m
- Zeroing Target — 5.56 NATO @ 100 m
- Zeroing Target — .308 Win @ 100 m
- Diagnostic Target — group analysis
- Holdover Chart — 5.56 NATO, 50 to 300 m
- ISSF 10-Ring — Olympic air pistol
- NRA B-8 Repair Centre — 25 yd pistol
- IPSC / USPSA Classic
- IDPA Target
- FBI Q Silhouette
- Threat Silhouette — no zones
Customize for your setup. Barrel length, altitude and temperature all move the drop. The calculator takes any load in the database and recomputes this table for your conditions.