ISSF 10-Ring Target — Olympic air pistol
The 10 m air pistol face at full size. Rings step 16 mm in diameter, so each ring is 8 mm wide and the black covers rings 7 to 10. Drawn from published ISSF dimensions, with no ISSF mark or artwork.
How to use it
- Print at 100% and measure the 100 mm bar — at these ring widths a 2% print error is a whole point.
- Hang at 10 m for air pistol, or use it as a precision face at any distance.
- The inner ten (5.0 mm) settles ties; it is not an X-ring, which is a different governing body's term.
- Score from the outside edge of the hole, as ISSF rules require.
Dimensions on this sheet
| Ring | Diameter | Field |
|---|---|---|
| 1 | 155.5 mm | white |
| 2 | 139.5 mm | white |
| 3 | 123.5 mm | white |
| 4 | 107.5 mm | white |
| 5 | 91.5 mm | white |
| 6 | 75.5 mm | white |
| 7 | 59.5 mm | black |
| 8 | 43.5 mm | black |
| 9 | 27.5 mm | black |
| 10 | 11.5 mm | black |
| inner 10 | 5.0 mm | tie-break |
Other targets
- Zeroing Target — 9×19mm @ 25 m
- Zeroing Target — 5.56 NATO @ 100 m
- Zeroing Target — .308 Win @ 100 m
- Diagnostic Target — group analysis
- Holdover Chart — 9mm, 7 to 50 m
- Holdover Chart — 5.56 NATO, 50 to 300 m
- NRA B-8 Repair Centre — 25 yd pistol
- IPSC / USPSA Classic
- IDPA Target
- FBI Q Silhouette
- Threat Silhouette — no zones
Customize for your setup. Barrel length, altitude and temperature all move the drop. The calculator takes any load in the database and recomputes this table for your conditions.