IDPA Target — printable silhouette
The IDPA face with its scoring areas, reduced to fit A4 and labelled with its scale. Reference reproduction from published dimensions, no IDPA mark.
How to use it
- Print at 100% and note the reduction printed on the sheet.
- Down-zero is the centre-mass circle and the head box.
- Scale your distance to the reduction if you are practising holds.
- Use a full-size target for anything that counts.
Dimensions on this sheet
| Zone | Where |
|---|---|
| -0 | Centre-mass circle and head box |
| -1 | Torso outside the down-zero areas |
| -3 | Periphery of the silhouette |
Other targets
- Zeroing Target — 9×19mm @ 25 m
- Zeroing Target — 5.56 NATO @ 100 m
- Zeroing Target — .308 Win @ 100 m
- Diagnostic Target — group analysis
- Holdover Chart — 9mm, 7 to 50 m
- Holdover Chart — 5.56 NATO, 50 to 300 m
- ISSF 10-Ring — Olympic air pistol
- NRA B-8 Repair Centre — 25 yd pistol
- IPSC / USPSA Classic
- FBI Q Silhouette
- Threat Silhouette — no zones
Customize for your setup. Barrel length, altitude and temperature all move the drop. The calculator takes any load in the database and recomputes this table for your conditions.