.308 Winchester 100 Yard Zero Target

The standard hunting and match zero, with M80 ball and 168 gr match on the same page so the difference between the two is a row apart rather than a second range trip. At 100 yards both are effectively flat — the rise before the zero is under a tenth of an inch — so this sheet is about the drop past it.

Full preview of the Zeroing Target — .308 Win @ 100 yd sheet
Download PDF · A4
Caliber · .308 Win / 7.62x51mm NATO
Load · M80 147 gr FMJ ball
Ballistic coefficient (G1) · 0.393
Muzzle velocity · 2800 fps (20 in rifle)
Sight height · 1.9 in
Sheet · A4 portrait, 210 × 297 mm

How to use it

  1. Print at 100% and check the 4 in bar.
  2. Set the target at 100 yd and fire five rounds from a bipod or bags.
  3. One grid square is one MOA at 100 yd, which is 1.05 in.
  4. The table gives point of impact at 50, 100, 200, 300 and 400 yd for both loads.

Ballistic data on this sheet

DistanceDrop (mm)MOAVelocity (m/s)Energy (J)
M8050 yd-0.3+0.726802345
M80100 yd0.00.025662149
M80200 yd-3.4+1.623431792
M80300 yd-13.2+4.221331483
M80400 yd-30.6+7.319321218
168 gr BTHP50 yd-0.3+0.525522429
168 gr BTHP100 yd0.00.024572250
168 gr BTHP200 yd-3.9+1.922701924
168 gr BTHP300 yd-14.5+4.620931635
168 gr BTHP400 yd-33.1+7.919261382

Computed by the BallisticEngine G1 point-mass model at 15 °C, sea level, 1013 hPa, no wind. Negative drop means the bullet lands below the point of aim. A different bullet weight or barrel length moves every number in this table — run your own load.

Other targets

Customize for your setup. Barrel length, altitude and temperature all move the drop. The calculator takes any load in the database and recomputes this table for your conditions.